Model :
WP-710 xtraflex 200H UV Protection Water-Based Acrylic Liquid Membrane

Description :
WP-710 XTRAFLEX 200H is a UV protection water-based acrylic liquid membrane. Once dry, it will form a flexible, waterproofing and durable film. It is designed to weatherproof and to protect roofs, joints, floors, walls and masonry surfaces from further erosion after repairs have been completed.

• TDS
• |
• SDS

Model :
WP-711 xtraprime 700 Cement Modifier Water-Based Copolymer Liquid

Description :
WP-711 XTRAPRIME 700 is a water-based copolymer liquid. It specially formulated as a cement modifier to enhance waterproofing and durability resistant of the cement and mortar. WP-711 XTRAPRIME 700 can be used as waterproofing primer as well to improve the adhesion of waterproofing material on the substrate.

• TDS
• |
• SDS

Model :
WP-712 xtrakoat 107 Cementitious Waterproofing Coating

Description :
WP-712 XTRAKOAT 107 is a two component, polymer modified, cementitious waterproofing coating. Apply in slurry form to waterproof concrete and cement mortar surfaces to prevent water immersion. WP-712 XTRAKOAT 107 also use as smoothing and waterproofing compound for basement, potable water tanks, retaining wall, seawall, swimming pool balcony, RC gutter, bathroom floor and wall. MIXING To get consistent mortar, use full quantities of both part A (5kg) and part B (20kg). Mixing should be carried out by using clean container and slowly adding part B to part A. Stir with a low-speed mixer for about few minutes until a perfectly homogeneous mix is obtain. For smoothing application, not more than 1 kg water can be added to 1 set WP-712. Use within 30 minutes.

• TDS
• |
• SDS